Высокоскоростной нагрев и охлаждение термостата сокращают время анализа и увеличивают производительность лаборатории. GC-2010 Pro — новая модель, созданная на базе GC-2010Plus, сочетает простоту управления с высокой эффективностью, чувствительностью и точностью.

Гибкая конфигурация
Одновременно могут работать две аналитические линии

Чувствительность детекторов одна из самых высоких в мире
Миниатюрные детекторы GC-2010 Pro демонстрируют высокую чувствительность и определяют следовые концентрации

Расширение возможностей
Возможность одновременной установки до трех инжекторов и трех детекторов

Программное обеспечение LabSolutions отвечает потребностям клиентов
ПО LabSolutions полностью интегрирует все функции ВЭЖХ и ГХ

Индивидуальная конфигурация

• Системы ввода равновесного пара HS-20, HS-10
• Комбинированная система вода жидких проб / равновесного пара / проведение ТФМЭ
• Автоинжектор с двумя башнями
• Система для проведения пиролиза
• Система для проведения имитированной дистилляции

Газовые хроматографы Nexis GC-2030, GC-2010 Pro, GC-2014, общая листовка

This product is only available in Europe, Southeast Asia and China.

Flexible lineup for various analysis
Two analytical lines can be operated simultaneously for different applications

Achieving excellent reproducibility
All units including the column oven, flow controller and sample injection unit are comprehensively optimized at the design stage to achieve world-class repeatability of peak area and peak height. The large vaporization capacity ensures excellent repeatability, even when using solvents that are highly volatile upon injection, such as acetone. Long-term stability of retention time is realized by the new room compensation technology built into the advanced flow controller (AFC).

High-speed analysis
High-speed analysis with narrow bore capillary columns reduces analysis time and improves sample throughput. GC-2010 Pro has excellent flow and pressure control system, which can meet the requirements of rapid analysis with conventional configuration and effectively improve the analysis efficiency.

Rapid oven heating / cooling
GC-2010 Pro incorporates a double-jet cooling system, which enables the reduction of cooling time from 450℃ to 50℃ in 3.4min, realizing more efficient and rapid cooling. In addition, with the ability of rapid heating, GC-2010 Pro can significantly reduce the analysis time.

Constant linear velocity mode quickly determines separation conditions
The constant linear velocity mode related to the separation performance is recommended for the carrier gas control and can obtain the optimum separation conditions in the shortest time compared with the previous control method by setting the column inlet pressure and flow.

Gas saver function reduces helium consumption
Reducing running cost by gas saving is an important issue in GC operation. GC-2010 Pro reduces gas consumption by decreasing of split ratio after injection as well as automatic shutdown functions after finishing all analysis.

Customized analysis systems based on different analysis requirements

All kinds of accessories are available for GC analysis

Headspace analysis system (HS-20)
The sample is sealed in a bottle, heated for a certain time, and the headspace is analyzed. Used to analyze the volatile components in solid or liquid.
System configuration
GC-2010 Pro + HS-20
Analysis applications
Measurement of residual solvents in pharmaceuticals
Measurement of flavor components in foods

Headspace analysis system (HS-10)

The HS-10 is highly cost effective sampler. It has may of the same features of higher end models but is offered at a lower price.
System configuration
GC-2010 Pro + HS-10
Analysis applications
Analysis of residual solvents
Blood alcohol

Liquid injection/headspace/SPME analysis system

Liquid, large volume, headspace and SPME injection in one single instrument. Used to analyze the volatile components in solid or liquid samples.
System configuration
GGC-2010 Pro + AOC-6000
Analysis applications
Measurement of residual solvents in pharmaceuticals
Measurement of faavor components in foods
* Appended software package

Dual tower injection system

The AOC-20 series includes a dual tower auto injector option which doubles the productivity of a single dual injector, dual detector gas chromatograph. The hignest productivity is then assured for applications such as simple hign sample throughput on identical GC analysis channels or for dual column confirmation. In either case, the AOC-20 dual tower configration is a powerful tool for laboratory productivity.

Pyrolysis system

Decomposes samples at high temperatures and analyzes the pyrolytic decomposition products.
System configuration
GC-2010 Pro + EGA/PY-3030D autosampler and cryotrap accessories available
Analysis applications
Characterization of high molecular weight compounds
Measurement of outgassing from inorganic samples, such as ceramics
* Appended software package

Simulated distillation GC system

Decomposes samples at high temperatures and analyzes the pyrolytic decomposition products.
System configuration
GC-2010 Pro +WBI or OCI + LabSolutions + simulated distillation software
Analysis applications
Petroleum fractions
* Some ASTM standards are not supported when using LabSolutions LE

This product is only available in Europe, Southeast Asia and China.

Industry Leading Detector Sensitivity
Responding to the ever increasing demands for trace level analysis, all detectors of GC-2010 Pro realize high sensitivity in miniaturization design. The new flame photometric detector (FPD) and flame ionization detector (FID) show significantly increased sensitivity.

Flame ionization detector FID
High-sensitivity has been achieved by thorough cleaning of detector gas lines and the latest noise-reduction technology.

Flame photometric detector FPD
It achieves compact design and improves the flame stability by improving the nozzle form. In addition, the «dual-focus system» achieves excellent ultra high sensitivity. The dual-focus system adds a lens to the interference filter for efficient light collection at the photomultiplier light receptor.

Options enhancing scalability
Simultaneously install up to three injection units and up to three detectors *
Select from three injection units and five detector types to suit the needs of your analysis. When using LabSolutions, three kinds of plotter can be used for simultaneous detection. Options such as injection units, detectors and autoinjectors can easily be retrofitted.

*The number of parts installed simultaneously depends on the type of injection unit and detector.

*Only two analytical lines could be running simultaneously.

High-performance injection unit series
In order to obtain good data, it is necessary to select an appropriate injection method according to the analysis purpose and sample. GC-2010 Pro can select the most suitable injection method from three injection units.

Split/splitless injector
Injection unit used for split/splitless injection of capillary column.
Standard configuration, namely, AFC with high performance, supports high-speed GC with narrow bore capillary columns.
Gas saver function reduces split gas consumption.
Permits high-pressure injection mode.
The purge flow can be set and changed to achieve more efficient sample purge and prevent cross contamination.

Direct injection unit
Used for full injection of wide bore capillary columns above 0.45mm.
Septum purge flow channel prevents solvent tailing.
Uses the same glass inserts as splitless analysis to simplify use.
(Patented)

On-column/programmed temperature vaporization injector
Temperature programmable Injector
The sample is injected at a low temperature and gasified by programmed heating of the injection port. This was recovery of thermolabile components can be improved. OCI is suitable for samples with a wide boiling point range.
Configured for either cool, on-column injector (OCI) or programmed temperature vaporization (PTV) injection mode.
Uses inert quartz PTV inserts.
An optional OCI insert allows connecting a narrow-bore capillary column directly to the injector without a 0.53mm pre-column. (No need to compress the connecting device)

Small and high-sensitivity detector series
The full range of high-sensitivity detectors supports a wide variety of application analyses. Each detector is equipped with an advanced pressure controller (APC) that digitally sets the gas parameters of each detector. To ensure secure use of hydrogen the connector joints have reverse threads to prevent incorrect pipe connections (FID, FPD, FTD).

Flame ionization detector
High-sensitivity has been achieved by thorough cleaning of detector gas lines and the latest noise-reduction technology.
Automatic ignition, re-ignition and flame extinguishing functions
Feedback function reduces gas supply pressure to zero when the hydrogen flame is extinguished.
Hydrogen connector joints have reverse threads to prevent incorrect pipe connections.

Electron capture detector
For analysis of electrophilic compounds and also for high sensitivity detection of organohalogen compounds, metallo-organic compounds and compounds with C=O double bond.
By thoroughly simulating the gas flow path inside the ECD detection cell, a gas flow path and the detection structure (Contact Free technology) are developed to minimize the contact between the samples flowing from the chromatographic column and the collector and the nickel wire source, thus significantly improving the durability of ECD detection cell.

Thermal conductivity detector
Microvolume cell for sharper peaks.
Analysis is not easily affected by the temperature changes within column oven

Flame thermionic detector
For analysis of organo nitrogen and phosphorus compounds, such as residual pesticides.
No tools needed for collector replacement.
Alkali source regeneration kit (option) reduces operational costs.
Hydrogen connector fittings have reverse threads to prevent pipe connections.

Flame photometric detector
For analysis of pesticide residues, odor components, phosphorous compounds, sulfur compounds and organo-tin compounds.
The dual-focus system achieves high sensitivity.
No tools required for replacement of interference filters with high daily maintenance frequency.

Automatic injection system
Atomatic liquid injection system for GC
Easy to install and remove.
AOC-20s can support analysis of up to 150 samples (1.5mL sample bottles).
A dual injection system can be configured with a combination off two AOC-20i injectors. Two-line simultaneous injection doubles the sample throughput to improve productivity.

Advanced Flow technology
Advanced flow technology is a capillary analysis system implementing chromatographic techniques like backflush, heart cut, and detector switching. It can achieve high efficiency and high separation by improving the efficiency of analysis and accurately separating the target component from the complex original samples. Special software for each system can be downloaded free of charge from Shimadzu official website.

Backflush system
The backflush system reverses the carrier gas flow after the target compounds have eluted, to discharge residual late eluting compounds in the column through the injection port split vent, thus shortening the analysis time and improving productivity. In addition, high-boiling point components are discharged efficiently to reduce the bakeout time and thus prevent column deterioration, contamination and retention time shifts.

Heart cutting system
The heart cutting system uses two chromatographic columns with different separation characteristics to separate specific compounds from complex original samples for quantitation. It can achieve high separation analysis which cannot be achieved
by single chromatographic column.

Detector splitting system
Compounds eluting from an analytical column may be split to multiple detectors to obtain multiple chromatograms. Offering abundant information in a single analysis, this system saves time and money and improves productivity. The combination of common detector and selective detector can improve the analysis accuracy and support the analysis of complex samples with more impurities.

Detector switching system
The detector switching system controls sample introduction through the switching device at the column outlet. Unlike the detector splitting system, the detector switching system can distribute the chromatographic column fractions to different detectors.

This product is only available in Europe, Southeast Asia and China.

Efficient workstation LabSolutions meeting customer needs
LabSolutions workstation fully integrates the functions of LC and GC
The LabSolutions series is the next-generation workstation software that integrates GC control, LC control, and other improvements in functionality, while maintaining compatibility with GC solution products. LabSolutions offers sophisticated functionality and easy operation.

User-friendly interface
The assistant bar, data explorer and other user-friendly interface of LabSolutions can make the beginners master the instrument in the shortest time. Windows for operating the instrument and assistant bar panels can be customized according to the working environment of the system. Therefore, LabSolutions offers both ease of operation and extensive functionality. The new data browser is convenient for comparing multiple sets of data by enabling access to chromatograms, peak information and quantitation results from multiple data files at the same time.

Fast batch function simplifies the tedious process of creating sample injection sequence (batch file)

The fast batch function in LabSolutions makes it easy to create batch files. The fast batch window displays the sample bottle racks graphically in the system. The operator can directly confirm the location of the sample bottle through the window, so as to create the batch file faster and more accurately.

LabSolutions CS: free access to the analysis network
LabSolutions CS manages all analytical data on the network server, perfectly integrates lab and office, and can be controlled by other client PC in the network through analytical instructions, device monitoring and remote mode. LabSolutions CS can also directly control non-Shimadzu LC or GC hosts.

Regulatory compliance

• Compliance with FDA 21 CFR Part 11 (US FDA)
• Compliance with the requirements for the use of electronic records and electronic signatures in drug approval or licensing (Ministry of Health, Labour and Welfare, Japan)
• Compliance with the computerized system management policy of pharmaceutical and health product manufacturers (Ministry of Health, Labour and Welfare, Japan)