Columns for SFC

Описание

Features

When conducting analysis with the Nexera UC supercritical fluid chromatography system, because diffusion of the sample band in the mobile phase is high compared with liquid chromatography, separation behavior changes significantly depending on the types of columns used.
Shim-pack UC-X series was designed with a variety of stationary phases, making it suitable for analysis of various compounds.

Achieve high speed and high performance
Shim-pack UC-X series offers various stationary phases suitable for the mobile phase of high diffusion and low-viscosity liquid carbon dioxide.
Analysis time can be reduced at a high flow rate without impairing the separation performance. In addition, analysis speed, which is limited in HPLC, can be increased.

Wide range of stationary phases meets diverse needs
Shim-pack UC-X series was designed with eight types of stationary phases and sizes to meet diverse research and development needs.

High durability and stable reproducibility
Shim-pack UC-X series achieves high inertness for improved analysis precision and increased column durability. Its uniform silica surface and stable chemical modification also ensure high analysis reproducibility.

Specifications

Shim-pack UC RP UC GIS II UC Phenyl UC CN
Bonded Phase Octadecyl Groups + Polar Functional Group Octadecyl Groups Phenyl Groups Cyanopropryl Groups
Particle Size (μm) 3, 5 3, 5 3, 5 3, 5
Max. Operating Pressure (MPa) 20 20 20 20
Pore Size (nm) 10 10 10 10
Surface Area (m2/g) 450 450 450 450
Carbon Loading 9 % 11 % 9.5 % 14 %
Pressure Tolerance (MPa) 50 (3μm), 30 (5μm) 50 (3μm), 30 (5μm) 50 (3μm), 30 (5μm) 50 (3μm), 30 (5μm)
Pore Volume (mL/g) 1.05 1.05 1.05 1.05
End-capping
pH Range 2 — 7.5 2 — 7.5 2 — 7.5 2 — 7.5
USP Code L1 L1 L11 L10
Shim-pack UC Diol UC Sil UC Amide UC NH2
Bonded Phase Diol Group Carbamoyl Groups Aminopropyl Groups
Particle Size (μm) 3, 5 3, 5 3, 5 3, 5
Max. Operating Pressure (MPa) 20 20 20 20
Pore Size (nm) 10 10 10 10
Surface Area (m2/g) 450 450 450 450
Carbon Loading 20 % 18 % 8 %
Pressure Tolerance (MPa) 50 (3μm), 30 (5μm) 50 (3μm), 30 (5μm) 50 (3μm), 30 (5μm) 50 (3μm), 30 (5μm)
Pore Volume (mL/g) 1.05 1.05 1.05 1.05
End-capping
pH Range 2 — 7.5 2 — 7.5 2 — 7.5 2 — 7.5
USP Code L20 L3 L8
Analysis Examples

Tocopherol isomers
Isomers and structurally similar compounds that are difficult to separate can be analyzed by Nexera UC and Shim-pack UC series at high speed. In this example, four kinds of tocopherol isomers were analyzed by Nexera UC and Shim-pack UC Sil. As indicated on the right, analysis time was reduced to one-third the time achieved with conventional HPLC method while resolution was improved.

Phospholipid classes
The example on the left shows the result of the analysis of phospholipid classes using Shim-pack UC-X Diol with Nexera UC. The ODS-based Shim-pack UC-X GIS II can also be used to analyze molecular species of phospholipids with the same modifiers. Nexera UC and Shim-pack UC-X series are ideal for analyzing complex samples.

Multiple pesticides with wide polarity range
Simultaneous analysis of multiple pesticides with a wide polarity range from hydrophobic to hydrophilic ones has been achieved using the Nexera UC using Shim-pack UC-X RP.
Shim-pack UCX-RP contains a polar functional group embedded between the silica surface and the C18 group. This allows the column to analyze a wide range of components from hydrophobic to hydrophilic ones.
Simultaneous analysis of multiple components can now be performed more efficiently using the Nexera UC and Shim-pack UC-X series.

For Research Use Only. Not for use in diagnostic procedures.

This page may contain references to products that are not available in your country.
Please contact us to check the availability of these products in your country.